Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
#

Carrier® - MBC12 HP Cassette 25' Install Kit Bundle (208/230-1-60)

Item: KIT-MBC12-CCQ-3-C2
  • 12,000 BTU
  • 19.5 SEER / 10.6 HSPF
  • 208-230V-1-60
  • Max 82' Line Length
  • Heat Pump

Included In This Bundle

  • 40MBCQ12---3 - 12000 Btuh Ductless Heat Pump Cassette
    Item: 40MBCQ12---3
    MFR: 40MBCQ12---3
    Quantity: 1
  • TRADEPRO® - TP-30AMP 30 AMP Fusible Disconnect
    Item: TP-30AMP
    MFR: TP-30AMP
    Quantity: 1
  • TRADEPRO® - TP-WHIP-1/2X6NM Non-Metallic Connector Whip 1/2" x 6'
    Item: TP-WHIP-1/2X6NM
    MFR: TP-WHIP-1/2X6NM
    Quantity: 1
  • DITEK - DTK-120/240CM+ Surge Protector 120V/240V
    Item: DTK-120/240CM
    MFR: DTK-120/240CM+
    Quantity: 1
  • Ductless 12000 Btuh Heat Pump Single Zone w/ Basepan Heater 208/230-1
    Item: 38MAQB12R--3
    MFR: 38MAQB12R--3
    Quantity: 1
  • JSG Electrical - DUCKT-14-04-CPK-25 DUCKT-STRIP® Mini-Split A/C Cable (25' Roll)
    Item: DUCKT-14-04-CPK-25
    MFR: DUCKT-14-04-CPK-25
    Quantity: 1
  • 40MBCQ01XXX3 - Grille/Ceiling Panel 2 ft x 2 ft
    Item: 40MBCQ01XXX3
    MFR: 40MBCQ01XXX3
    Quantity: 1
  • JMF - 1/4" x 3/8" x 1/2" x 25' Pre-Insulated Line Set
    Item: DL04060825HX
    MFR: DL04060825HX
    Quantity: 1

* Required Fields

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

About This Product

Product Info

Description

Carrier® - MBC12 HP Cassette 25' Install Kit Bundle (208/230-1-60)

Bundle Includes:
  • Condenser
  • Cassette Fan Coil
  • Panel
  • Disconnect
  • Surge Protector
  • Whip
  • Cable
  • Pre-Insulated Line Set

Specifications

BrandVaries

Bundle Components

40MBCQ12---3 - 12000 Btuh Ductless Heat Pump Cassette

Item: 40MBCQ12---3

Description

40MBCQ12---3
40 = Fan Coil Unit
MB = Model
C = Cassette - Indoor Fan Coil Type
Q = Heat Pump - System Type
12 = 1 Ton - Nominal Capacity
- = Not Used
-- = Not Used
3 = 208/230-1-60 - Voltage


FEATURES / BENEFITS
A PERFECT BALANCE BETWEEN BUDGET LIMITS, ENERGY SAVINGS AND COMFORT.
The 40MBCQ series ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
The in-ceiling cassette fan coils are ideal for retrofit or modernization projects where a false ceiling is available. This selection of fan coils permits inexpensive and creative solutions to design problems such as:
  •  Add-ons to current space (an office or family room addition)
  •  Special space requirements
  •  When changes in the load cannot be handled by the existing system
  •  When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork
  •  Historical renovations or any application where preserving the look of the original structure is essential.
The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork. These compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils are attractively styled to blend with most room decors.
Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.

LOW SOUND LEVELS
When noise is a concern, the ductless systems are the answer. The indoor units are whisper quiet. There are no compressors indoors, either in the conditioned space or directly over it, and there is none of the noise usually generated by air being forced through ductwork.
SECURE OPERATION
If security is an issue, outdoor and indoor units are connected only by refrigerant piping and wiring to prevent intruders from crawling through ductwork. In addition, since outdoor units can be installed close to an outside wall, coils are protected from vandals and severe weather.
FAST INSTALLATION
This compact ductless system is simple to install. A mounting bracket is standard with the indoor units and only wire and piping needs to run between indoor and outdoor units. These units are fast and easy to install ensuring minimal disruption to customers in the home or workplace. This makes the ductless systems the equipment of choice, especially in retrofit situations.
SIMPLE SERVICING AND MAINTENANCE
Removing the top panel on outdoor units provides immediate access to the control compartment, providing a service technician access to check unit operation. In addition, the draw-thru design of the outdoor section means that dirt accumulates on the outside surface of the coil. Coils can be cleaned quickly from inside using a pressure hose and detergent.
On all indoor units, service and maintenance expense is reduced due to easy-to-use cleanable filters. In addition, these cassette systems have extensive self-diagnostics to assist in troubleshooting.
BUILT-IN RELIABILITY
Ductless system indoor and outdoor units are designed to provide years of trouble-free operation.
The in-ceiling cassette units include protection against freeze-up and high evaporator temperatures on heat pumps.
The condensing units on heat pumps are protected by a three minute time delay before the compressor starts the over-current protection and the high temperature protection.
INDIVIDUAL ROOM COMFORT
Maximum comfort is provided because each space can be controlled individually based on usage pattern. The air sweep feature provided permits optimal room air mixing to eliminate hot and cold spots for occupant comfort. In addition, year-round comfort can be provided with heat pumps.
ECONOMICAL OPERATION
The ductless system design allows individual room heating or cooling when required. There is no need to run large supply-air fans or chilled water pumps to handle a few spaces with unique load patterns. In addition, because air is moved only in the space required, no energy is wasted moving air through ducts.
EASY-TO-USE CONTROLS
The in-ceiling cassette has microprocessor-based controls to provide the ultimate in comfort and efficiency. The user friendly wireless remote control provides the interface between user and the unit.
FACTORY INSTALLED CONDENSATE LIFT PUMP
Customizing these ductless systems to your application is easily accomplished. The factory installed condensate lift pump on the cassette fan coil unit provides installation flexibility.
OPTIONAL WIRED CONTROLLER
AGENCY LISTINGS

All systems are listed with AHRI (Air Conditioning, Heating & Refrigeration Institute), and ETL.

Specifications

Weight35.27 Pounds (lbs)
Width22.44 Inches (In)
Height10.24 Inches (In)
Country of OriginCHN
Length22.44 Inches (In)
Blower Motor HP61/1000 HP
Blower Motor RPM960
Blower Motor Speeds3
Blower Motor TypeFixed Torque
BrandCarrier,Payne,Bryant
CertificationsAHRI Certified
CFM280-400
ColorWhite
Cooling Capacity12000
Cooling Rated Capacity Btu/h12000
Cycle/Hertz60 Hz
Drain Connection Size1"
Liquid Line FittingFlare
Liquid Line Size (OD)1/4"
Minimum Circuit Amps0.2
PhaseSingle
Product Family40MBCQ
Prop 65Yes
Rated Current Amps0.146
RefrigerantR-410a
SEER0
Suction Line FittingFlare
Suction Line Size (OD)1/2"
TierPerformance,Preferred™
Tonnage1
Voltage208-230 VAC
Warranty OfferedYes

TRADEPRO® - TP-30AMP 30 AMP Fusible Disconnect

Item: TP-30AMP

Description

Fused model designed with fuses in pull-out handle for easy replacement. The line, load, and ground terminals are aligned for ease of wiring. This product has a reversible door which opens to either the left or right. The side open door opens more than 180 degrees for maximum access and has a full dead front. The fused models have indicator lights for blown fuses. This is rain tight and sleet resistant. The UL Listed number is IRF9, NEMA Type 3R and the US Patent is 6,630,637.

Specifications

Weight2.75 Pounds (lbs)
Width5 Inches (In)
Height7.5 Inches (In)
Country of OriginCHN
Length2.5 Inches (In)
Amps30
BrandTRADEPRO®
ColorBlack
CSA ListingNo
Cycle/Hertz60 Hz
PhaseSingle
Prop 65No
TypeFusible
Voltage208-230 VAC

TRADEPRO® - TP-WHIP-1/2X6NM Non-Metallic Connector Whip 1/2" x 6'

Item: TP-WHIP-1/2X6NM

Description

Liquid-tight flexible conduit system. A labor saving convenience kit for A/C unit hookup. Also use for heat pumps, refrigeration, hot tubs, swimming pools and outdoor lighting. Three distinct wire colors for ease of hook-up. 1 straight and 1 90 degree metallic or non-metallic connector. 90 degree connector is removable for straight connections. (Second straight connector not included.) U.L. and C.U.L Listed.

Specifications

Weight1.8 Pounds (lbs)
Width11 Inches (In)
Height2 Inches (In)
Country of OriginUSA
Length16.75 Inches (In)
ApplicationLiquid tight flexible conduit system. A labor saving convenience kit for A/C unit hookup. Also use for heat pumps, refrigeration, hot tubs, swimming pools and outdoor lighting.
BrandTRADEPRO®
Fitting Size1/2"
Overall Length6'
Prop 65No
Size1/2" X 6'
TypeNon-Metallic
Wire Gauge10 AWG

DITEK - DTK-120/240CM+ Surge Protector 120V/240V

Item: DTK-120/240CM

Description

DITEK’s 120/240CM+ is a durable, cost-effective SPD suitable for use in a variety of locations. It is typically used to protect pumps, motors, HVAC condensers, and incoming utility power. Backed by a ten year warranty, the DTK-120/240CM+ is an excellent choice for effective, economical protection.

Features and Benefits:
  • Weatherproof enclosure
  • Parallel connection for easy installation
  • Diagnostic LED provides positive indication of power, ground presence, and surge protection
  • Automatically resets to handle multiple surge events
  • Typical Applications: A/C disconnect, small electrical panels, pool/well pumps
  • Ten year limited warranty
  • Made in the USA

Specifications

Weight0.661 Pounds (lbs)
Width1.75 Inches (In)
Height3 Inches (In)
Country of OriginUSA
Length2.75 Inches (In)
BrandDITEK
Cycle/Hertz50/60 Hz
Full Load Amps72
PhaseSingle
Prop 65No
StageSingle
Voltage120/240 VAC

Ductless 12000 Btuh Heat Pump Single Zone w/ Basepan Heater 208/230-1

Item: 38MAQB12R--3

Description

38MAQB12R--3
38 = OUTDOOR UNIT
MA = MODEL
Q = HEAT PUMP SYSTEM TYPE
B = 1:1 MAXIMUM NUMBER OF FAN COIL UNITS THAT CAN BE CONNECTED TO THE OUTDOOR UNIT
12 = 1 TON NOMINAL CAPACITY
R = HIGH HEAT UNIT TYPE
-- = NOT USED
3 = 208/230-1-60

Replaces : 38MAQB12---3

The 38MA*R series ductless split systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.The ductless system permits creative solutions to design problems such as:

  • Add-ons to current space (an office or family room addition)
  • Special space requirements
  • When changes in the load cannot be handled by the existing system
  • When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork

Historical renovations or any application where preserving the look of the original structure is essential.The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork. The compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils are attractively styled to blend with most room decors. Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.

LOW SOUND LEVELS
When noise is a concern, the ductless split systems are the answer.The indoor units are whisper quiet. There are no compressors indoors, either in the conditioned space or directly over it, and there is none of the noise usually generated by air being forced through ductwork.
When sound ordinances and proximity to neighbors demand quiet operation, the 38MA*R unit is the right choice. The advanced, horizontal airflow design distributes air more evenly over the coil.
SECURE OPERATION
If security is an issue, outdoor and indoor units are connected only by refrigerant piping and wiring to prevent intruders from crawling through ductwork. In addition, since 38MA*R units can be installed close to an outside wall, coils are protected from vandals and severe weather.
FAST INSTALLATION
This compact ductless split system is simple to install. A mounting bracket is standard with the indoor units and only wire and piping need to be run between the indoor and outdoor units (High Walls).These units are fast and easy to install ensuring minimal disruption to customers in the home or workplace. This makes the 38MA*R ductless split systems the equipment of choice, especially in retrofit situations.
SIMPLE SERVICING AND MAINTENANCE
Removing the top panel on outdoor units provides immediate access to the control compartment, providing a service technician access to check unit operation. In addition, the draw-thru design of the outdoor section means that dirt accumulates on the outside surface of the coil. Coils can be cleaned quickly from the inside using a pressure hose and detergent.
On all indoor units, service and maintenance expense is reduced due to easy-to-use cleanable filters. In addition, these systems have extensive self-diagnostics to assist in troubleshooting.
BUILT-IN RELIABILITY
Ductless split system indoor and outdoor units are designed to provide years of trouble-free operation.
The indoor units include protection against freeze-up and high evaporator temperatures on heat pumps.
The condensing units on heat pumps are protected by a three minute time delay before the compressor starts the over-currentprotection and the high temperature protection.
INDIVIDUAL ROOM COMFORT
Maximum comfort is provided because each space can be controlled individually based on usage pattern. The air sweep (in some indoor models) feature provided permits optimal room air mixing to eliminate hot and cold spots for occupant comfort. In addition, year-round comfort can be provided with heat pumps.
ECONOMICAL OPERATION
The ductless split system design allows individual room heating or cooling when required. There is no need to run large supply-airfans or chilled water pumps to handle a few spaces with unique load patterns. In addition, because air is moved only in the space required, no energy is wasted while air moves through the ducts.
EASY-TO-USE CONTROLS
The indoor units have microprocessor-based controls to provide the ultimate in comfort and efficiency. The user friendly wireless remote control provides the interface between the user and the unit.
ACCESSORIES
Customizing these ductless split systems to your application is easily accomplished. Adding a condensate pump accessory to the indoor fan coil provides installation flexibility.
OPTIONAL WIRED CONTROLLER
AGENCY LISTINGS
All systems are listed with AHRI (Air Conditioning, Heating & Refrigeration Institute), and ETL.

Specifications

Weight91.5 Pounds (lbs)
Width32.09 Inches (In)
Height21.81 Inches (In)
Country of OriginCHN
Length13.11 Inches (In)
BrandBryant,Carrier
CertificationsAHRI Certified
CFM1200
Circuit Breaker - Max Amps15
ColorGray
Condenser Motor HP1/20 HP
Condenser Motor RPM900
Condenser Motor TypeDirect Drive
Cooling Capacity12000
Cooling Rated Capacity Btu/h12000
Cycle/Hertz60 Hz
EER12.5
Heating Capacity12000
HSPF12
InverterYes
Liquid Line FittingFlare
Liquid Line Size (OD)1/4"
Maximum Fuse Size15
Maximum Piping Length82'
Minimum Circuit Amps9
Number of HVAC Zones1
PhaseSingle
Product Family38MAR
Prop 65Yes
Rated Current Amps5.7
Rated Load Amps5.7
RefrigerantR-410a
SEER22
Sound Level (dBA)56
StageVariable
Suction Line FittingFlare
Suction Line Size (OD)1/2"
TierPerformance,Preferred™
Tonnage1
Voltage208-230 VAC
Warranty OfferedYes
Zone Capability1 Zone

JSG Electrical - DUCKT-14-04-CPK-25 DUCKT-STRIP® Mini-Split A/C Cable (25' Roll)

Item: DUCKT-14-04-CPK-25

Description

JSG Electrical - DUCKT-14-04-CPK-25 DUCKT-STRIP® Mini-Split A/C Cable (25' Roll)


THE ONLY RIP N' STRIP MINI-SPLIT CABLE™

Innovations:
  • Innovative Rip-N-Strip™ technology
  • No blade required
  • Safer
  • One wire covers interior//exterior compliance
Applications:
  • From the Mini-Split outdoor condensing unit to the indoor unit. Power and Control in 1 cable.
  • 14/4 (14/3 w/grd) & 16/4 (16/3 w/grd) Standard Conductors
  • 75°C Jacket, 90°C Conductors, at least 60°Wet Locations
Standards & References
Duckt-Strip® meets the following standards and references:
  • UL E483632
  • Underwriters Laboratories Standard 493 - Underground Feeder UF-B
  • Underwriters Laboratories Standard 2988 - Universal Hybrid Power and Signal/Control Cable
  • Made in the USA

Specifications

Weight2.5 Pounds (lbs)
Width8 Inches (In)
Height1.5 Inches (In)
Country of OriginUSA
Length8 Inches (In)
ApplicationDuctless Mini Split Units from Outdoor Condenser to Indoor Diffuser
BrandDuckt-Strip™
Cable TypeUniversal Hybrid Power Signal/Control UHPS/C AND UF-B, Underground Feeder
Coil Length25'
ColorGray, Yellow
Conductor Quantity3
ConductorsStranded Copper, 14 AWG
Insulation TypePVC
Jacket MaterialPVC
Prop 65No
Temperature Rating194°F (90°C)
TypeDuctless Mini Split Cable
Wire Gauge14 AWG

40MBCQ01XXX3 - Grille/Ceiling Panel 2 ft x 2 ft

Item: 40MBCQ01XXX3

Description

40MBCQ01XXX3 - Grille/Ceiling Panel 2 ft x 2 ft

Specifications

Weight6 Pounds (lbs)
Width25.47 Inches (In)
Height1.97 Inches (In)
Country of OriginCHN
Length25.47 Inches (In)
BrandCarrier,Bryant,Payne
ColorWhite
For Use With40MBCQ 09/012/018
Prop 65Yes
TierStandard

JMF - 1/4" x 3/8" x 1/2" x 25' Pre-Insulated Line Set

Item: DL04060825HX

Description

JMF - DL04060825HX 1/4" X 3/8" X 1/2" X 25' Pre-Insulated Line Sets for Ductless Mini-Split Systems, VRF Commercial Systems & Split Systems (A/C & Heat Pump).
  • Meets ASTM E84 for Smoke & Fire (25/50)
  • Superior tear resistance for easier installation of line set.
  • UV Resistant
  • R410A Approved
  • Insulation is marked every foot for quick measurement.
  • Paintable FRUITLAND PARK
  • Copper Tubing: Commercial Grade Refrigeration Tubing – Copper No. C122200 DHP Phosphorous deoxidized, high residual phosphorous.
  • Insulation – According to ASTM E96-00 Low Density Polyethylene Foam: Closed cells foam, CFC & HCFC gas free
  • Wall Thickness ½” R Value = R3.3
  • R-Value calculation using a K-Factor of 0.25 BTU-in/hr-ft (2)-F 75º F, 24ºC mean temp.
  • Working Temperature: Meets/exceeds ASTM C 1427-07
  • Surface Burning Characteristics” UL, 94HBT, UL 723, ASTM E84 (25/50), flame and spread index less than 25 and smoke development index les than 50 as tested according to UL 723.
  • EZ-Pull Insulation – White Hard Shell.

Specifications

Weight9.2446 Pounds (lbs)
Width4 Inches (In)
Height34 Inches (In)
Country of OriginVNM
Length34 Inches (In)
BrandJMF
Coil Length25'
ColorWhite
CompositionCopper & Elastomeric Insulation
Insulation Thickness Liquid LineNone
Insulation Thickness Suction Line1/2"
Liquid Line Size (OD)1/4"
Pipe Length25'
Prop 65Yes
Size1/4" x 3/8" x 1/2" x 25'
Suction Line Size (OD)3/8"

Equipment Part List

Loading...