Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
Click here for information on new branch procedures as a result of COVID-19

Carrier® - MHQ09 HP High Wall 50' Install Kit Bundle (208/230-1-60)

Item: KIT-MHQ09-HWQ-3-C5

Included In This Bundle

  • TRADEPRO® - TP-30AMP 30 AMP Fusible Disconnect
    Item: TP-30AMP
    MFR: TP-30AMP
    Quantity: 1
  • TRADEPRO® - TP-WHIP-1/2X6NM Non-Metallic Connector Whip 1/2" x 6'
    Item: TP-WHIP-1/2X6NM
    MFR: TP-WHIP-1/2X6NM
    Quantity: 1
  • JMF - 1/4" x 3/8" x 1/2" x 50' Pre-Insulated Ductless Straight Mini Split Copper Lineset
    Item: DL04060850HX
    MFR: DL04060850HX
    Quantity: 1
  • 40MHHQ09---3 - Ductless 9000 BTU High Wall Indoor Unit Heat Pump 208/230-1-60
    Item: 40MHHQ09---3
    MFR: 40MHHQ09---3
    Quantity: 1
  • JSG Electrical - DUCKT-14-04-CPK-50 DUCKT-STRIP® Mini-Split A/C Cable (50' Roll)
    Item: DUCKT-14-04-CPK-50
    MFR: DUCKT-14-04-CPK-50
    Quantity: 1
  • Ductless 9000 Btuh Heat Pump Single Zone w/ Basepan Heater 230V, R410a, 16 SEER
    Item: 38MHRBQ09AA3
    MFR: 38MHRBQ09AA3
    Quantity: 1
  • DITEK - DTK-120/240CM+ Surge Protector 120V/240V
    Item: DTK-120/240CM
    MFR: DTK-120/240CM+
    Quantity: 1

* Required Fields

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

About This Product

Product Info

Description

Carrier® - MHQ09 HP High Wall 50' Install Kit Bundle (208/230-1-60)
  • Heat Pump
  • 9,000 BTU
  • 18.5 SEER / 10 HSPF
  • Max 82' Line Length
  • 208-230V-1-60
Bundle Includes:
  • Condenser
  • High Wall Fan Coil
  • Disconnect
  • Whip
  • Surge Protector
  • Cable
  • Pre-Insulated Line Set
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

Specifications

BrandCarrier
Prop 65Yes

Documents

Loading...

Bundle Components

TRADEPRO® - TP-30AMP 30 AMP Fusible Disconnect

Item: TP-30AMP

Description

Fused model designed with fuses in pull-out handle for easy replacement. The line, load, and ground terminals are aligned for ease of wiring. This product has a reversible door which opens to either the left or right. The side open door opens more than 180° for maximum access and has a full dead front. The fused models have indicator lights for blown fuses.
  • Rain tight and sleet resistant
  • UL Listed IRF9, NEMA Type 3R and US Patent 6,630,637

Specifications

Weight2.75 Pounds (lbs)
Width5 Inches (In)
Height7.5 Inches (In)
Country of OriginCHN
Length2.5 Inches (In)
Amps30
ApplicationHVAC circuitry
BrandTRADEPRO®
ColorBlack
CSA ListingNo
CUL ListedNo
Cycle/Hertz60 Hz
ETL ListedNo
Maximum Voltage230
PhaseSingle
PolesThree
Prop 65No
TypeFusible
UL ListedNo
UL RecognizedYes
Voltage208-230 VAC

TRADEPRO® - TP-WHIP-1/2X6NM Non-Metallic Connector Whip 1/2" x 6'

Item: TP-WHIP-1/2X6NM

Description

Liquid-tight flexible conduit system - a labor saving convenience kit for A/C unit hookup. Also use for heat pumps, refrigeration, hot tubs, swimming pools and outdoor lighting. Three distinct wire colors for ease of hook-up. Includes one straight and one 90° metallic or non-metallic connector. 90° connector is removable for straight connections. (Second straight connector not included.)
  • U.L. and C.U.L Listed

Specifications

Weight1.8 Pounds (lbs)
Width11 Inches (In)
Height2 Inches (In)
Country of OriginUSA
Length16.75 Inches (In)
ApplicationLiquid tight flexible conduit system. A labor saving convenience kit for A/C unit hookup. Also use for heat pumps, refrigeration, hot tubs, swimming pools and outdoor lighting.
BrandTRADEPRO®
CUL ListedYes
Fitting Size1/2"
Overall Length6'
Prop 65No
Size1/2" X 6'
TypeNon-Metallic
UL ListedNo
UL RecognizedNo
Wire Gauge10 AWG

JMF - 1/4" x 3/8" x 1/2" x 50' Pre-Insulated Ductless Straight Mini Split Copper Lineset

Item: DL04060850HX

Description

JMF - DL04060850HX 1/4" X 3/8" X 1/2" X 50' Pre-Insulated Line Sets for Ductless Mini-Split Systems, VRF Commercial Systems & Split Systems (A/C & Heat Pump).
  • Meets ASTM E84 for Smoke & Fire (25/50)
  • Superior tear resistance for easier installation of line set.
  • UV Resistant
  • R410A Approved
  • Insulation is marked every foot for quick measurement.
  • Paintable FRUITLAND PARK
  • Copper Tubing: Commercial Grade Refrigeration Tubing – Copper No. C122200 DHP Phosphorous deoxidized, high residual phosphorous.
  • Insulation – According to ASTM E96-00 Low Density Polyethylene Foam: Closed cells foam, CFC & HCFC gas free
  • Wall Thickness ½” R Value = R3.3
  • R-Value calculation using a K-Factor of 0.25 BTU-in/hr-ft (2)-F 75º F, 24ºC mean temp.
  • Working Temperature: Meets/exceeds ASTM C 1427-07
  • Surface Burning Characteristics” UL, 94HBT, UL 723, ASTM E84 (25/50), flame and spread index less than 25 and smoke development index les than 50 as tested according to UL 723.
  • EZ-Pull Insulation – White Hard Shell.

Specifications

Weight15.4218 Pounds (lbs)
Width5.3125 Inches (In)
Height34 Inches (In)
Country of OriginVar
Length33 Inches (In)
BrandJMF
Coil Length50'
ColorBlack
CompositionCopper & Insulation
Insulation Thickness Liquid Line1/2"
Insulation Thickness Suction Line1/2"
Liquid Line Size (OD)1/4"
Pipe Length50'
Prop 65Yes
Size1/4" x 3/8" x 1/2" x 50'
Suction Line Size (OD)3/8"
UL RecognizedNo

40MHHQ09---3 - Ductless 9000 BTU High Wall Indoor Unit Heat Pump 208/230-1-60

Item: 40MHHQ09---3

Description

40MHHQ09---3
40 = FAN COIL UNIT
MH = MODEL
H = HIGH WALL / INDOOR FAN COIL TYPE
Q = HEAT PUMP / SYSTEM TYPE
09 = .75 TON / NOMINAL CAPACITY
--- = NOT USED
3 = 208/230-1-60 / VOLTAGE

The 40MHH series ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
The fan coil is mounted on the wall, near the ceiling. This selection of fan coils permits creative solutions to design problems such as:
  • Add-ons to current space (an office or family room addition)
  • Special space requirements
  • When changes in the load cannot be handled by the existing system
  • When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork
  • Historical renovations or any application where preserving the look of the original structure is essential.
The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork. These compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils are attractively styled to blend with most room decors. Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.

LOW SOUND LEVELS
When noise is a concern, the ductless systems are the answer. The indoor units are whisper quiet. There are no compressors indoors, either in the conditioned space or directly over it, and there is none of the noise usually generated by air being forced through ductwork.
SECURE OPERATION
If security is an issue, outdoor and indoor units are connected only by refrigerant piping and wiring to prevent intruders from crawling through ductwork. In addition, since the outdoor units can be installed close to an outside wall, coils are protected from vandals and severe weather.
FAST INSTALLATION
This compact ductless system is simple to install. A mounting bracket is standard with the indoor units and only wire and piping need to be run between the indoor and outdoor units. These units are fast and easy to install ensuring minimal disruption to customers in the home or workplace. This makes the ductless systems the equipment of choice, especially in retrofit situations.
SIMPLE SERVICING AND MAINTENANCE
Removing the top panel on outdoor units provides immediate access to the control compartment, providing a service technician access to check unit operation. In addition, the draw-thru design of the outdoor section means that dirt accumulates on the outside surface of the coil. Coils can be cleaned quickly from the inside using a pressure hose and detergent. On all indoor units, service and maintenance expense is reduced due to easy-to-use cleanable filters. In addition, these high wall systems have extensive self-diagnostics to assist in troubleshooting.
BUILT-IN RELIABILITY
Ductless system indoor and outdoor units are designed to provide years of trouble-free operation. The high wall indoor units include protection against freeze-up and high evaporator temperatures on heat pumps. The condensing units on heat pumps are protected by a three minute time delay before the compressor starts the over-current protection and the high temperature protection.
INDIVIDUAL ROOM COMFORT
Maximum comfort is provided because each space can be controlled individually based on usage pattern. The air sweep feature provided permits optimal room air mixing to eliminate hot and cold spots for occupant comfort. In addition, year-round comfort can be provided with heat pumps.
ECONOMICAL OPERATION
The ductless system design allows individual room heating or cooling when required. There is no need to run large supply-air fans or chilled water pumps to handle a few spaces with unique load patterns. In addition, because air is moved only in the space required, no energy is wasted while air moves through the ducts.
EASY-TO-USE CONTROLS
The high wall units have microprocessor-based controls to provide the ultimate in comfort and efficiency. The user friendly wireless remote control provides the interface between the user and the unit.
ACCESSORIES
Customizing these ductless systems to your application is easily accomplished.
Adding a condensate pump accessory to the high wall fan coil provides installation flexibility.
OPTIONAL WIRED CONTROLLER
AGENCY LISTINGS
All systems are listed with AHRI (Air Conditioning, Heating & Refrigeration Institute), and ETL.

STANDARD FEATURES:
  • Up-Down Louver control (fixed or swing)
  • Remove filter from the top
  • Improved serviceability with easy access to fan and electrical connections
  • Four fan speeds
  • Sleep Mode
  • Follow Me (senses temperature at handheld remote)
  • Quiet operation
  • Aluminum Blue Hydrophilic pre-coated fins
Controls:
  • Wireless Remote Controller included with indoor unit

Specifications

Weight21.16 Pounds (lbs)
Width28.53 Inches (In)
Height11.81 Inches (In)
Country of OriginCHN
Length7.75 Inches (In)
Blower Motor HP1/37 HP
Blower Motor RPM1200
Blower Motor Speeds4 (Four)
Blower Motor TypeFixed Torque
BrandPayne,Bryant,Carrier
CertificationsAHRI Certified
CFM165-324
Circuit Breaker - Min Amps0.25
ColorWhite
Cooling Capacity9000
Cooling Rated Capacity Btu/h9000
Cycle/Hertz60 Hz
Drain Connection Size0.625"
Energy Star RatedNo
ETL ListedYes
Liquid Line Size (OD)1/4"
Mounting TypeWall
PhaseSingle
Product Family40MHH
Prop 65Yes
Rated Current Amps0.25
RefrigerantR-410a
Suction Line Size (OD)3/8"
TierLegacy™,Comfort™
Tonnage0.75
UL ListedYes
Voltage208-230 VAC
Warranty OfferedYes

JSG Electrical - DUCKT-14-04-CPK-50 DUCKT-STRIP® Mini-Split A/C Cable (50' Roll)

Item: DUCKT-14-04-CPK-50

Description

JSG Electrical - DUCKT-14-04-CPK-50 DUCKT-STRIP® Mini-Split A/C Cable (50' Roll)

THE ONLY RIP N' STRIP MINI-SPLIT CABLE™

Innovations:
  • Innovative Rip-N-Strip™ technology
  • No blade required
  • Safer
  • One wire covers interior//exterior compliance
Applications:
  • From the Mini-Split outdoor condensing unit to the indoor unit. Power and Control in 1 cable.
  • 14/4 (14/3 w/grd) & 16/4 (16/3 w/grd) Standard Conductors
  • 75°C Jacket, 90°C Conductors, at least 60°Wet Locations
Standards & References
Duckt-Strip® meets the following standards and references:
  • UL E483632
  • Underwriters Laboratories Standard 493 - Underground Feeder UF-B
  • Underwriters Laboratories Standard 2988 - Universal Hybrid Power and Signal/Control Cable
  • Made in the USA

Specifications

Weight5.2 Pounds (lbs)
Width9 Inches (In)
Height2.25 Inches (In)
Country of OriginUSA
Length9 Inches (In)
ApplicationDuctless Mini Split Units from Outdoor Condenser to Indoor Diffuser
BrandDuckt-Strip™
Cable TypeUniversal Hybrid Power Signal/Control UHPS/C AND UF-B, Underground Feeder
Coil Length50'
ColorGray, Yellow
Conductor Quantity3
ConductorsStranded Copper, 14 AWG
CUL ListedNo
Insulation TypePVC
Jacket MaterialPolyvinyl Chloride (PVC)
Prop 65No
Temperature Rating194°F (90°C)
TypeDuctless Mini Split Cable
UL ListedYes
UV ResistantYes
Wire Gauge14 AWG

Ductless 9000 Btuh Heat Pump Single Zone w/ Basepan Heater 230V, R410a, 16 SEER

Item: 38MHRBQ09AA3

Description

38MHRBQ09AA3
38 = OUTDOOR UNIT
MH = MODEL
R = OUTDOOR UNIT / UNIT TYPE
B = MAJOR SERIES
Q = HEAT PUMP / SYSTEM TYPE
09 = 9000 BTUH / NOMINAL CAPACITY
A = 1:1 / MAXIMUM NUMBER OF FAN COIL UNITS THAT CAN BE CONNECTED TO THE OUTDOOR UNIT
A = STANDARD / VARIATIONS
3 = 208/230-1-60 / VOLTAGE

A PERFECT BALANCE BETWEEN BUDGET LIMITS, ENERGY SAVINGS AND COMFORT.
The 38MHRB series ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
The ductless system permits creative solutions to design problems such as:
  • Add-ons to current space (an office or family room addition)
  • Special space requirements
  • When changes in the load cannot be handled by the existing system
  • When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork
  • Historical renovations or any application where preserving the look of the original structure is essential.
The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork.
The compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils are attractively styled to blend with most room decors. Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.

Specifications

Weight63.9 Pounds (lbs)
Width30.31 Inches (In)
Height21.85 Inches (In)
Country of OriginCHN
Length11.81 Inches (In)
BrandBryant,Payne,Carrier
Circuit Breaker - Max Amps15
Circuit Breaker - Min Amps8
ColorWhite
Cooling Capacity4400-10000
Cooling Rated Capacity Btu/h9000
Cycle/Hertz60 Hz
EER10.6
Energy Star RatedNo
ETL ListedYes
InverterYes
Liquid Line FittingFlare
Liquid Line Size (OD)1/4"
Number of HVAC Zones1
PhaseSingle
Product Family38MHRB
Prop 65Yes
Rated Current Amps5.5
RefrigerantR-410a
SEER16
Single ZoneYes
StageSingle
Suction Line FittingFlare
Suction Line Size (OD)3/8"
TierStandard
Tonnage0.75
UL ListedNo
Voltage208-230 VAC
Warranty OfferedYes

DITEK - DTK-120/240CM+ Surge Protector 120V/240V

Item: DTK-120/240CM

Description

DITEK - The 120/240CM+ is a durable, cost-effective SPD suitable for use in a variety of locations. It is typically used to protect pumps, motors, HVAC condensers, and incoming utility power. Backed by a ten year warranty, the DTK-120/240CM+ is an excellent choice for effective, economical protection.

Features and Benefits:
  • Weatherproof enclosure
  • Parallel connection for easy installation
  • Diagnostic LED provides positive indication of power, ground presence, and surge protection
  • Automatically resets to handle multiple surge events
  • Typical Applications: A/C disconnect, small electrical panels, pool/well pumps
  • Ten year limited warranty
  • Made in the USA

Specifications

Weight0.55 Pounds (lbs)
Width1.89 Inches (In)
Height3.4 Inches (In)
Country of OriginUSA
Length3.5 Inches (In)
BrandDITEK
Cycle/Hertz60 Hz
Full Load Amps0.072
PhaseSingle
Prop 65Yes
Voltage120/240 VAC

Equipment Part List

Loading...