Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
Click here for information on new branch procedures as a result of COVID-19

Carrier® WeatherMaker™ - 10 Ton Packaged Rooftop Heat Pump Unit, 2-Stage, Med. Static, Precoat Coil (460-3-60)

Item: 50TCQD12A2B6-0A0G0
MFR: 50TCQD12A2B6-0A0G0

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

About This Product

Product Info


50TC = WeatherMaker® Packaged Rooftop
Q = Heat Pump
D = Two Stage Cooling Models
12 = 10 ton
A = None
2 = Medium Static Option - Belt Drive
B = Precoat Al/Cu - Al/Cu
6 = 460-3-60
= Factory Design Revision
0 = Electro-mechanical Controls can be used with W7212 EconoMi$er IV (Non-Fault Detection and Diagnostic
A = None
0 = None
G = 2-Speed Indoor Fan Controller (VFD)
0 = Standard
* Contact your Carrier expert for additional information.

Your Carrier Packaged Heat Pump rooftop unit (RTU) was designed by customers for customers. With no-strip screw collars, handled access panels, and more we’ve made your unit easy to install, easy to maintain and easy to use.
Easy to install:
All WeatherMaker™ units are field-convertible to horizontal air flow which makes it easy to adjust to unexpected job site complications. Lighter units make easy replacement. Carrier 3 - 12.5 ton 50TCQ rooftops fit on existing Carrier curbs dating back to 1989. Also, our large control box gives you room to work and room to mount Carrier accessory controls.
Easy to maintain:
Easy access handles by Carrier provide quick and easy access to all normally serviced components. Our “no-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal. Take accurate pressure readings by reading condenser pressure with panels on. Simply remove the black, composite plug, route your gauge line(s) through the hole, and connect them to the refrigeration service valve(s). Now, you can take refrigeration system pressure readings without affecting the condenser airflow.
Easy to use:
The newly designed, central terminal board by Carrier puts all your connections and troubleshooting points in one convenient place, standard. Most low voltage connections are made to the same board and make it easy to find what you’re looking for and easy to access it. Carrier rooftops have high and low pressure switches, a filter drier, and 2-in. (51mm) filters standard.

  • SEER up to 13.4, EER up to 11.2.
  • IEER up to 12.2 with single speed indoor fan motor and up to 12.5 with 2-speed/VFD indoor fan motor.
  • Up to 28% lighter than similar industry units. Lighter rooftops make easier replacement jobs.
  • 3 - 12.5 ton units fit on existing Carrier rooftop curbs making the utility connections the same. This saves time and money on replacement jobs.
  • Standardized components and layout. Standardized components and controls make service and stocking parts easier.
  • Scroll compressors on all units. This makes service, stocking parts, replacement, and trouble-shooting easier.
  • Crankcase heater on all models (except 04 size) provides added protection in all applications.
  • Precision-sized suction line accumulator provides high reliability by preventing liquid from entering the compressor during low ambient conditions and reverse cycle switch over.
  • Field convertible from vertical to horizontal airflow configuration on all models. No special kit required on 04-12 models. Supply duct kit required for 14 model only.
  • 4-way reversing valve rapidly changes the flow of refrigerant to quickly changeover from cooling to heating and heating to cooling.
  • Easy-adjust, belt drive motor available on all sizes. There’s no need for field-supplied drives or motors.
  • 3-5 ton models come standard with Direct Drive X13, 5 speed/torque motor to provide exact performance in many applications. Belt drive motor optional.
  • Provisions for bottom or side condensate drain.
  • Capable of thru-the-base or thru-the-curb electrical routing.
  • Dependable time/temperature defrost logic provides a defrost cycle, if needed, every 30, 60, 90 or 120 minutes and is adjustable.
  • Single-point electrical connection.
  • Sloped, composite drain pan sheds water; and won’t rust.
  • Standardized controls and control box layout. Standardized components and controls make stocking parts and service easier.
  • Clean, large, easy to use control box.
  • Standard coils are copper round tube, aluminum plate fin with optional coil coatings and copper fin design.
  • Color-coded wiring.
  • Large, laminated wiring and power wiring drawings which are affixed to unit make troubleshooting easy.
  • Single, central terminal board for test and wiring connections.
  • Fast-access, handled, panels for easy access to the blower and blower motor, control box, and compressors.
  • “No-strip” screw system guides screws into the panel and captures them tightly without stripping the screw, the panel, or the unit.
  • Exclusive, newly-designed indoor refrigerant header for easier maintenance and replacement.
  • Mechanical cooling (115°F to 25°F or 46°C to -4°C) on Electro-Mechanical (E/M) and Direct Digital Controller (DDC) (PremierLinkt or RTU Open controller).
  • 2-in. (51mm) disposable filters on all units.
  • High capacity refrigerant filter drier on each circuit.
  • High pressure switch, loss of charge switch and freeze protection adds greater unit reliability.
  • Optional Staged Air Volume (SAV) system utilizes a Variable Frequency Drive (VFD) to automatically adjust the indoor fan motor speed between cooling stages. Available on 2-stage cooling models 08-14 with electromechanical controls or RTU Open.
Warning: this product contains a chemical known to the State of California to cause cancer.


Weight1050 Pounds (lbs)
Width59.5 Inches (In)
Height49.375 Inches (In)
Country of OriginMEX
Length88.125 Inches (In)
Air FlowMulti-Position
Blower Motor HP2 9/10 BHP
Blower Motor RPM591-838
Blower Motor Speeds2 (Two)
Blower Motor TypeConstant Torque Programmable
Blower Wheel15" x 15"
Circuit Breaker - Max Amps90,60,80,30
Circuit Breaker - Min Amps26,89,75,86
Condenser Motor HP1 HP
Condenser Motor RPM1175
Condenser Motor TypeDirect Drive
Cooling Capacity117000
Cooling Rated Capacity Btu/h120000
Cycle/Hertz60 Hz
Drain Connection Size3/4"
Drive TypeBelt
Electric Heat Range [kW]13.9-50
Energy Star RatedNo
ETL ListedYes
Filter Size(4) 20" x 20" x 2" RA Filter, 20" x 24" OA Inlet Screen
Heating Capacity62300-116000
Locked Rotor Amps52
Product Family50TCQ
Prop 65Yes
Rated Load Amps7.7
Sound Level (dBA)87
UL ListedYes
Voltage460 VAC
Warranty OfferedYes



Equipment Part List