Frequently Bought Together
About This Product
Delivered on high tensile aluminum foil facestock with an antimicrobial acrylic adhesive, these UL 181 AP / B-FX registered tapes are used in HVAC mechanical installation to seal aluminum duct work and FSK board. Come with a 20 year limited warranty.
Used to seal joints and seams on fiberglass duct board and flexible duct in the HVAC market. UL 181 A-P /B-FX classified.
Features: Specially formulated antimicrobial acrylic adhesive High tensile strength aluminum foil facestock Meets SMACNA performance standard AFTS 101-73 PSA complies with South Coast Air Quality Management District's (SCAQMD) Rule 1168 Benefits:
20-year Fasson limited product warranty Ultimate in product reliability Made in the USA
Weight 2.25 Pounds (lbs)
Width 2.5 Inches (In)
Height 6 Inches (In)
Country of Origin USA
Length 6 Inches (In)
Adhesion Strength 3.8 lbs/in
Application Seals joints and seams on fiberglass duct board and flexible duct
Application Temperature >50°F (10°C)
Approvals UL 181 A-P/B-FX LEED Point contibutor
Composition 2 mil Aluminum foil
Functions Joining and Sealing Fiberglass Ductboard and Class 1 Flexible Duct
Maximum Temperature 400°F (204.4°C)
Performance Temperature 350°F (176.6°C)
Prop 65 No
Roll Length 180'
Shelf Life One year when stored at 64-72ºF (18-22ºC) / 30-70% relative humidity, out of direct sunlight and in original packaging
Size 2.5" x 180'
Standards UL 181A-P and 181B-FX LEED® Point Contributor
Storage Temperature 64°F to 72°F (17.7°C to 22.2°C)
Tensile Strength 25 lbf/in minimum
Thickness 7.20 Mils
Type High Tensile Strength Aluminum Foil
Specification Sheet - English
Safety Data Sheet 1 - English
Equipment Part List
Back To Equipment Models