Factory Authorized Parts™ - HD44AE235 Blower Motor 1/2 HP 208/230 V 4.1 Amp 1050 RPM

Frequently Bought Together

All Products

About This Product

Product Info

Description

When looking for replacement motors, look no further than our Factory Authorized Parts (FAP)! FAP are designed to meet exact Carrier® Corporation specifications, ensuring optimum system performance, proven reliability, easy installation and maintenance and safe system operation.

FAP Features

Improved Efficiency - Motor runs at most efficient portion of motor performance curve by design
Ensures motor is not overloaded
Ensures that motor operates at the design RPM, which produces the correct airflow
Reduced System Vibration - System design put motor RPM at optimal point for limiting torque pulsations that can generate excess vibration in the unit
Reduced Noise - System qualification includes additional testing such as start/stop and pure tone noise identification which further ensures there is not excessive vibration or noise during unit operation.
Overall length of motor assures that fan is located at intended position to minimize sound and maximize airflow
Reduced stress on components
Natural frequencies of the top system are determined through design process.
Motor operating frequencies are designed away from these resonances
Reduced wear on system
Motors tested to Temprise standard, stricter than required by UL 1995.
Motors must meet maximum winding temperatures required by UL at higher ambient and wider voltage ranges (RES-SPL-CQR-0012A)
Stringent design-life testing provides longer life 100,000 on/off cycles and 50,000 total running hours; 15 years.
Reliability Testing Regimen - Each motor chassis design goes through internal and supplier testing including salt spray, torture, life, and operational envelope testing. (CC14BD002 and Alternating Current Fan Motor Standard)
Raceway Connections - FAP motors have liquid tight connector for lead exit that connects to raceway.
Wire Terminations and Lengths - Wire terminations are the same as production motors so no termination is necessary. Wire lengths reach required end points without alteration.
Fewer On-site Modifications required - Fan guards and top covers are designed to accept FAP motors without modification.
Exact size fit means easiest access.
Few Hardware issues - Hardware used to mount and secure original motor can be used to mount replacement motor UL & CSA Qualified Both the CBP unit and the FAP motor are UL & CSA qualified. Using the FAP motor maintains UL & CSA qualification of the equipment

Specifications

Weight	10.65 Pounds (lbs)
Width	5.5 Inches (In)
Height	9.75 Inches (In)
Country of Origin	IND
Length	5.5 Inches (In)
Blower Motor HP	1/2 HP
Brand	RCD Parts
CSA Listing	Yes
Cycle/Hertz	50 Hz
Factory Authorized Part	Yes
Full Load Amps	4.1
Motor HP	1/2 HP
NEMA Frame	48
Phase	Single
Prop 65	No
Rotation	Counter-Clockwise
RPM	1050
UL Listed	No
UL Recognized	No
Voltage	208-230 VAC
Warranty Offered	Yes

Documents

Main (1)

Consumer Literature - English

Replacement For

Item: HD44AE235
Item: HD44AE235
Item: HD44AE235
Item: HD44AE235
Item: HD44AE235
Item: HD44AE235
Item: HD44AE235
Item: HD44AE235
Item: HD44AE235
Item: HD44AE235

Your Account

Create An Account

Your Lists

Delivery & Pickup